 |  |  |  |  |
| GateTel GSM modems specialist |
| EZ10 Terminal |
EZ10 base on GE862 PYTHON modem.
The EZ10 GPS with PYTHON offers customer program inside the modem,
Thus making the terminal a complete customer solutions.
Directly controlled by standard serial RS-232 interface and offering a
board supply voltage range ( 5-32 V DC ).
The EZ10 is universal solution for all low volume m2m applications.
EZ10 GPS product comply to the RoHS directive of EU.
Product Features
Quad-Band EGSM 850/900/1800/1900 MHz
Output Power Class 4 (2W) 850/900MHz, Class 1 (1W ) 1800/1900MHz
At commands according to GSM 07.05, 07.07 and proprietary Telit
Supply Voltage Rage: 5-32 V DC
Power Consumption, power off: 26uA, idle: 8 mA, GPRS(max): 700 mA
Dimensions: 107x 64 x 33 mm
Weight: 135 gr.
Temperatures range: -20 / +70 C
4 I/O General Purpose I/O or IIC Bus, RJ11
D-Type 9 pin connector for RS232 communication 300 to 115,00 bps
SMA female, 50 ohm connector for GSM
PYTHON script interpreter, Memory: 3 MB of NV, 1.5 MB RAM
| Quad Band |
| RoHS Compliant |
| SIM Holder |
| PYTHON |
| Extended Temperature Range |
| 4 GPIO or Audio RJ11 |
| Serial Port |
| EZ10 Terminal PYTHON script RS232 to GPRS |
EZ10 RS232 to GPRS PTYHON application
The GateTel EZ10 PYTHON terminal is complete Modem solution, With preloaded PYTHON script.
EZ10 send RS232 information to remote server.
EZ10 control by SMS command.
The GateTel EZ10 PYTHON terminal is complete Modem solution, With preloaded PYTHON script.
EZ10 send RS232 information to remote server.
EZ10 control by SMS command.
| RS232 over GPRS |
| Download PYTHON software via GPRS |
| SMS control and setup command |
-------------RS232 information sent by GPRS-----------------
-------------connection to remote PC-----------------------------
-------------connection to remote PC-----------------------------
* After getting the NOT READY FOR SETTINGS reply, unit is going to normal mode.
* In normal mode, the unit connects to the GPRS using the APN, USER NAME and GPRS password
afterward the unit is connecting to the IP ADDRESS with the REMOTE PORT.
* After the connection to the remote computer established the unit replies: CONNECT and from now on,
transfer to the serial port.
* When the connection has lost the unit reply: NO CARRIER and try to reconnect to the remote computer.
Setup mode
* Turn on the unit
* Wait for reply: READY FOR SETTINGS
* The unit is waiting 10 seconds to get in the setup mode,
if within this 10 seconds the word: set (low case) has been hit, the unit go to Setup mode.
* When unit has got in to setup mode the unit reply: GO TO SETTINGS MODE
if the unit did’t got in setup mode, the unit reply: NOT READY FOR SETTINGS
* In setup mode there are 5 commands that can be sent to the unit:
1. Help - gives the list of all supported commands
2. 0:APN,GPRS USER,GPRS PASSWORD - the setup of the GPRS
3. 1:IP ADDRESS,REMOTE PORT - the setup of the remote IP and port
4. BR=BAUDE RATE - the setup of the baud rate
5. exit - exit setup mode and reboot the unit
Examples for unit setup:
0:internet,orange,mobile54
1:192.168.1.5,10101
BR=115200
* In normal mode, the unit connects to the GPRS using the APN, USER NAME and GPRS password
afterward the unit is connecting to the IP ADDRESS with the REMOTE PORT.
* After the connection to the remote computer established the unit replies: CONNECT and from now on,
transfer to the serial port.
* When the connection has lost the unit reply: NO CARRIER and try to reconnect to the remote computer.
Setup mode
* Turn on the unit
* Wait for reply: READY FOR SETTINGS
* The unit is waiting 10 seconds to get in the setup mode,
if within this 10 seconds the word: set (low case) has been hit, the unit go to Setup mode.
* When unit has got in to setup mode the unit reply: GO TO SETTINGS MODE
if the unit did’t got in setup mode, the unit reply: NOT READY FOR SETTINGS
* In setup mode there are 5 commands that can be sent to the unit:
1. Help - gives the list of all supported commands
2. 0:APN,GPRS USER,GPRS PASSWORD - the setup of the GPRS
3. 1:IP ADDRESS,REMOTE PORT - the setup of the remote IP and port
4. BR=BAUDE RATE - the setup of the baud rate
5. exit - exit setup mode and reboot the unit
Examples for unit setup:
0:internet,orange,mobile54
1:192.168.1.5,10101
BR=115200